Project overview The medical glove storage warehouse designed by our company built in Ethiopia on May 2020, the whole warehouse size is 165m x 25m x 14m, and the bick wall is 2 meter. The all warehouse building area is about 4125 sqm. It is a single-span frame, the wall and roof panel is polyurethane sandwich panel, and the door is sandwich panel sliding doors. The width of 25 m without center col...

Project overview The steel structure warehouse built in Eritrea on March 2017 , which is used as industrial production storage building. The Eritrea located in northeast Africa, with a population of approximately 6.7 million, and its official language is English. The local mineral resources are abundant and attract a lot of foreign investment. The owner of this steel structure warehouse building i...

Project overview Our comapny designed and processed the steel structure workshop in Uganda. The project was built in Uganda on January 2019, it was used as production plant. The entire warehouse is 150 meters long and 75 meters wide. It is 6 meters high, and the brick wall height is 3 meters. We provide a full set of metal workshop building components, including beam and column, purlin, PPGI sheet...

Chicken house product introduction Classification 1.Based on the chicken raising type, free range raising and cage raising, the poultry house divided into free range raising type and cage raising type poultry house. 2.15-18 broilers per square meter, 18-20 laying hens per square meter. Main Features 1)Perfect way to offer protection to your chickens also giving them the freedom to access fresh air...

Project overview The storage warehouse project finshed in Algeria on August 2018. Its dimension as follows: Length: 120m, width: 25m, eave height 8m. The whole building area is about 3000 sqm. We design the shed building in strength and save energy, before the process of engineer design our engineer team will calculate the wind load and snow load. The massive wind speed or snow load will be requir...

In November 2019, our Chilean customer has a steel structure warehouse of 3,024 square meters with a height of 11 meters and is divided into two floors. This 2-storey warehouse is used to store different goods. This customer will use cranes. According to his requirement, we have designed a warehouse with crane beams. The crane specification is: 10T units, remind the customer that it cannot be over...

Product time 2019.12 Size 41.5m x 46.4m x 5.8m Area 1925.6 sqm Location Uganda After receiving the customer’s design requirements, our team of engineers combined the local climate to calculate wind load and so on to determine the amount of steel used and the design plan to ensure the durability and stability of the steel building structure. We provide a complete steel structure building kit, inclu...

Project overview The steel structural storage warehouse designed and manufactured by baofeng company has completed the installation on September 2019. The storage warehouse built in Ethiopia, the entire metal building is 60 meters long, 18 meters wide, 6 meters high, and the bick wall is 1.5 meter. The steel storage warehouse is a single-span, the wall and roof panel adopted the single steel ...

Project details The steel structural workshop project was built in Philippines on December 2019. All steel structure parts bolted. We shipped it to the customer’s site after processing it in our factory. It was installed by local workers. All steel components are hot-dip galvanized and have excellent corrosion resistance. The length of the steel structure workshop is 59.7 meter, the width is 31.7 ...