Size:120m x 22m x 2m;
Area:2640sqm;
Item No.:
Js-25Payment:
T/T, L/CProduct origin:
Hebei,ChinaShipping port:
Tianjin portLead Time:
about 30 daysPrice:
29-39 usd/sqmPhilippine square tube chicken house,size: 120m x 22m x 2m.
The project details are as follows:
Enclosure board: red top board veneer + glass silk wool felt + EPS composite board wall board;
With windows and size: 10 sets of PVC sliding windows W2000*H600mm
Equipped with door and size:14 sets of iron door single leaf W900*H2000mm;
2 sets of equipped with door and size: double-leaf iron door W1500*H2000mm;
Wind load : 0.40KN/M2;
Roof dead load : 0.20KN/M2;
Roof live load : 0.320KN/M2;
Brick wall height: 0.5m;
Prefab steel chicken house characteristics
1. Wide span:single span or multiple spans, the max span is 36m without middle column.
2. Low cost and maintenance: unit price range from USD30/m2 to USD65/m2 according to customers request.
3. Fast construction and easy installation: time saving and labor saving.
4. Long using lifespan: up to 50 years.
5. Nice appearance.
6. Others: environmental protection, stable structure, High quake-proof, water proof and fire proof, and energy conserving.
7.Based on the chicken raising type, free range raising and cage raising,the poultry house divided into free range raising type and cage raising type poultry house.
8.15-18 broilers per square meter, 18-20 laying hens per square meter.
If you need it, please answer the following questions so that we can serve you in time:
1>What about the length width and height you need to build?
2>Or how many chickens do you want to raise?boiler or layer?
3>Do you have a drawing of your chicken house?
4>Where is your project site?
We can design the most reasonable plan for you according to your actual requirements and your local climate and other conditions.
Steel structure production process
1. Using automated equipment - CNC flame cutting machine, the steel plate will be cut into main steel components
Advantages: 1> Accurate cutting, error±2mm; 2> High production efficiency, can cut 150-200 tons of plates a day;
2. Use automated equipment - CNC drilling machine for small parts production
Advantages: fast speed, high precision, deviation≤1mm, to ensure 100% installation error-free
3. Use automatic equipment--straightening and welding integrated machine, H-beam assembly, submerged arc welding, and straightening three processes into one
Advantages: The error of the finished product is +—2mm, and the finished product is produced about 25 meters per hour, which greatly improves production efficiency.
4. Use the section steel intelligent marking robot to mark the welding position of the four sides of the section steel and mark the component number
Advantages: high accuracy, can be temporarily or permanently marked. It replaces the manual measurement of the later assembly team, which improves the production efficiency of the later production process by more than 80%
5. Use the steel cutting robot for thermal cutting of H-beam, I-beam, etc.
Advantages: The error range is within 2mm; the cutting port is smooth and beautiful, which is convenient for the later welding of the welding port; the tedious process of artificial incision and post-grinding is omitted; the cutting efficiency is fast, and the output can reach up to 50T/day.
6. Assemble the connecting plate; perform local spot welding by electric welding; check the dimensions to ensure that the dimensions of each component conform to the drawings.
7. Solder all the connections in the assembly process
Advantages: high productivity in cross-operation with assembly process, fast welding efficiency
8. Shot blasting and derusting process
Through the impact and cutting action of the spray material on the profiled steel, the surface rust of the profiled steel is removed to increase the roughness, and manual slag removal treatment is also performed.
Advantages: very good preparation for painting, enhanced adhesion of the coating to the profiled steel, extended durability of the coating film
9. Spray paint
Spray paint according to the drawings and customer requirements, and spray 4 times. After completion, the surface of the component will not sag, no bubbles, no cracks, and the color is uniform and beautiful.
10. Composite board/veneer production
Composite board production machine: 2000 square meters can be produced a day;
Veneer production machine: can produce 10,000 meters a day;
11. C section steel production
High production efficiency, can produce 5000 meters a day
12. Accessories production
Production of accessories such as bending parts;
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Categories